|
|
|
|
|
|
|
|
|
M201P-WDR |
|
| 20.1” LCD PVM with integrated high resolution color WDR camera, white case |
 |
|
|
| Product Literature |
En |
Fr |
| Spec Sheet |
|
|
| Manual |
|
|
|
| Mechanical Line Drawing |
|

| The M201 PVM series monitors are high brightness and contrast TFT LCD monitors with a built-in high-resolution Wide Dynamic Range (WDR) color CCD camera with integrated auto-iris vari-focal lens. The monitors include programmable Video Motion Detection (VMD) capability for the internal camera and a second video input for an external camera or other video source. The internal VMD allows the monitor view to switch to the internal camera when motion occurs. The VMD sensitivity, capture time and dwell time may be individually programmed. |
|
| The monitors offer a clean aesthetic appearance with no visible operator controls. The monitor and camera programming is accomplished using the supplied IR Remote Control. A built-in selectable Light Sensor permits the monitor to enter a “sleep” mode when ambient lighting is lowered, thus providing extended LCD backlight life. Three video outputs are provided; one loop-through video output for the internal camera and two auxiliary outputs each selectable between the internal or external video input as additional loop-through video connections. |
|
| The wide dynamic range (WDR) camera provides increased visibility when sources of high illumination are located directly behind a scene of lower illumination, such as a retail front entrance. |
|
| The monitors contain two powerful 2.5W audio amplifiers and speakers for stereo line-level audio input. |
|
| The monitors feature a 100mm VESA mount connection point for use with various LCD mounts (see accessories). Camera and power wiring is concealed within a removable rear access cover for aesthetic purposes. The internal camera’s field of view, focus and iris may be easily adjusted by removing the camera assembly from the rear of the monitor. The monitors provide external 12VDC power for supplying power to a second camera. |
| • Compact attractive look for high visibility retail applications with no visible controls |
| • Built-in high resolution color WDR camera with 4-9mm VF AI lens concealed in front bezel |
| • Wireless remote control (included) |
| • External 2nd camera input |
| • High Brightness and Contrast TFTLCD Color Monitor |
| • Video Motion Detection (VMD) capability (internal camera) |
| • Built-in Light Sensor for sleep mode |
| • Three video output connectors (Internal camera loop-out, two outputs programmable) |
| • Concealed wiring with easy access cover |
| • Built-in 12VDC power for external camera or optional video server |
| • Six language selections |
| Monitor |
|
|
Display Source |
Built-in WDR Camera + External Video Input
|
|
LCD Panel |
20.1 inches (510.54mm) TFT LCD Panel |
|
Active Display Area |
408.0 mm (H) x 306.0 mm (V) |
|
Pixel Format |
1600(H) x 1200(V), RGB, RGB vertical stripe |
|
Pixel Pitch |
0.6375mm x 0.6375mm |
|
Color Depths |
8 Bit / 16.7M Colors |
|
Contrast Ratio |
800 : 1 (Typical) |
|
Brightness |
300 cd/m2 (Typical) |
|
Viewing Angles H/V (Typical, Cr> 10) |
178/178 |
|
Light Source/Lifetime |
6CCFL / 45,000Hrs (Minimum) |
|
Response Time |
8 ms (G to G) (Typical) |
|
|
|
| Video Integrated Camera (WDR |
Camera) |
|
Video Mode |
NTSC |
|
Camera Video Input Level |
1.0Vp-p @ 75 ohm |
|
CCD Image Sensor |
1/3” Sony Super HAD CCD |
|
Resolution |
540TVL
|
|
Sensitivity |
1 Lux (F2.0, 50 IRE) (WDR: CLR 0.004 Lux)
|
|
S/N Ratio |
50dB |
|
Auto Iris |
Yes |
|
Auto White Balance |
Yes |
|
Electronic Shutter |
1/60 ~ 1/100,000 sec |
|
VF Lens |
2.8 - 11mm AI
|
|
|
|
| Video (External Input) |
|
|
Video Input Connector |
BNC x 1 |
|
Video Mode |
NTSC / PAL |
|
Video Input Level |
1.0Vp-p @ 75 ohm |
|
Video Output Connector |
BNC x 3 |
|
Video Output Level |
1.0Vp-p @ 75 ohm |
|
|
|
| Audio |
|
|
Audio Input Level |
Line level |
|
Audio Input Connector |
RCA x 2 |
|
Audio Amplifier |
5W x 2 |
|
|
|
| General |
|
|
DC Output |
DC 12V / 500mA (for external camera or video server) |
|
Power Requirement |
DC 12V / 6A |
|
Power Consumption |
72Watts |
|
Operating Temperature |
32ºF - 104ºF (0ºC ~ 40ºC) |
|
Case Material |
Plastic |
|
Dimensions (W x H x D) |
18.24” x 17.88” x 3.24” (463mm x 455mm x 82mm) |
|
Weight |
16.45lbs (7.4kg) |
|
|
|
| Accessories |
DC Adapter, Power Cord, Manual, Remote Control |
| A-CS777 |
Mount, LCD, wall, 3-axis swivel head |
| A-CS779E |
LCD Mount, Extended Channel, for 2.5” Lithonia power pole |
| A-CSW775E |
Mount, LCD, ceiling, adjustable, white |
| A-CSB775E |
Mount, LCD, ceiling, adjustable, black |
| A-CSW780 |
C-mount adapter and VESA plate, white |
| A-CSB780 |
C-mount adapter and VESA plate, black |
Printer-Friendly Page |
|
|
|