The CF and CV dome series feature a 1/3” 540TVL high-resolution CCD camera integrated into a plastic indoor or vandal outdoor dome housing. The cameras are offered as a high resolution color model and as a full-featured model with TRUE D/N and IR LEDs for low-light level applications. The domes are suitable for ceiling or wall surface mounting and offer an advanced easy to adjust 3-D gimbal which permits unlimited camera positioning.

The cameras are supplied with a 4-9mm vari-focal auto iris lens enabling the camera’s field of view to match a wide ranging scene of interest. The auto-iris lens permits the camera to adjust automatically for changing light levels throughout the day and night. The domes are puncture resistant and are offered in a clear dome with liner. The cameras are supplied with both BNC for video and flying lead for use with class 2 power wiring and RJ-11 connections for versatility in all CCTV applications.

A video service jack with a BNC connector allows easy on-site adjustment of the camera settings and camera field-of-view positioning.

Interior Dome Series

The interior dome series are a perfect alternative to standard full-body cameras, while providing deterrent value in the application. The clean look of the interior dome series offers an unobtrusive appearance for interior retail and office environments. The interior dome is available in black or white housing color.

Vandal Dome Series

The vandal dome series are perfect for applications when protection for the camera is required. The vandal domes are integrated into a full aluminum housing and offer IP66 protection. The housing may be flush-mounted or surface-mounted using the included angled mounting plate. The angled mounting plate allows a greater lookup or lookdown angle from the horizon.

The vandal domes offer an unobtrusive appearance with a “no-grab” design and all tamper-resistant hardware is included to help prevent unauthorized entry into the camera housing.

The VDMWC is a versatile pendent mount designed for ceiling and wall applications for the CF and CV series domes. The mount provides an internal cable channel to conceal the video and power cabling. The total drop down length is 15.5” using the straight pendent ceiling mount. The total drop down length is 10.2” with a wall offset of 8” using the 90° pendent wall mount. The FDCAP is the back-shell of the VDWMC. The FDCAP may be installed using the customer supplied 1” NPT pipe or ¾” EMT conduit with 1” to ¾” adapter.

• 540 TVL High-resolution CCD
• TRUE D/N and IR LED operation
• 0 Lux operation (total darkness)
• Fully integrated enclosure with rugged impact and vandal resistant shroud
• Advanced 3-D gimbal
• Video service jack
• 4-9mm vari-focal auto-iris for wide range of coverage in multiple applications
• Vandal domes for secure and outdoor applications
• Clean, unobtrusive interior domes
• Tamper resistant hardware included (vandal domes only)
• 24VAC / 12VDC / 15VDC (RJ-11)
• Optional pendent mount for wall and ceiling installations

Models	A-CF540 A-CV540	A-CF540DNIR A-CF540DNIRB A-CV540DNIR
Power
Power Source	24VAC / 12VDC / 15VDC (RJ-11)	24VAC / 12VDC / 15VDC (RJ-11)
Power Consumption	3.5W max	3.0W max / 6.0W IR on
General
Image Sensor	1/3” Sony Super HAD CCD	1/3” Sony Super HAD CCD
Total Pixels	811 (H) x 508 (V)	811 (H) x 508 (V)
Scanning System	2:1 Interlace	2:1 Interlace
Scanning Frequency	15.734KHz (H) 59.94Hz (V)	15.734KHz (H) 59.94Hz (V)
Sync. System	Internal / Line Lock	Internal / Line Lock
Electronic Shutter	1/60 – 100,000 sec	1/60 – 100,000 sec
Resolution	540 TV Lines	540 TV Lines
Min. Illumination	0.5 lux, F1.2, 50 IRE	0.5 lux (color), 0.04 lux (B/W), 0 lux (IR LED on) @ F1.2, 50 IRE
Video Output	1.0Vp-p (75-ohm, composite)	1.0Vp-p (75-ohm, composite)
S/N Ratio	More than 50dB (AGC Off)	More than 50dB (AGC off)
Camera Control	DIP Switch	OSD (Tact Switch)
DNR Function		On
Function
Auto Exposure	Normal/Flickerless/Manual Shutter (1/60, FLC, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000)	Normal/Flickerless/Manual Shutter (1/60, FLC, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000)
E/I	On / Off	Yes
Lens	DC / ELC	DC / ELC
Flickerless	On / Off
BLC	On / Off	On / Off
AGC	On / Off	Off / Low / Middle / High
Sens Up		Off / x2 / x4 / x8 / x16 / x32
White Balance	ATW Fixed	ATW / AWC / Manual
Day / Night		Auto / Day / Night / Ext (IR Camera default setting: EXT)
Motion Detection		On / Off (Sensitivity & Alarm time selective)
Privacy Zone		On / Off (4 point)
Display Title		On / Off
Video Picture		POSI / NEGA
Brightness		0 – 60
Sharpness		0 – 15
Mirror		Normal / Mirror / Vertical / Rotate
Zoom		On 1 – 8 (x4) / Off (x1)
Sync	INT / LL	INT / LL
IR
IR LED		23 pcs high brightness IR LED
IR Wavelength		850 nm
IR Distance Range		25m – 30m (from object of view reflected infrared)
IR Project Angle		40°
IR On / Off		Light Sensor Control
Connector & Environmental
Power Input	2-pin Wire / RJ-11 connector	2-pin Wire / RJ-11 connector
Video Output	BNC & RJ-11 connector	BNC & RJ-11 connector
Lens Mount	Fixed Mount	Fixed Mount
Lens	4 – 9mm, F1.6 – 2.4, VF DC/AI	4 – 9mm, F1.6 – 2.4, VF DC/AI
Operating Temperature	14°F – 104°F (-10°C – 40°C)	14°F – 104°F (-10°C – 40°C)
Operating Humidity	0 – 96% (non-condensing)	0 – 96% (non-condensing)
Mechanical
External Dimension (base diameter or square X H)
Interior Dome	5.75” x 4.12”, bubble dia. 4.45”
Vandal Dome	5.12” x 3.94”, bubble dia. 3.46”
Interior Dome DNIR		4.72” x 3.46”, bubble dia. 3.94”
Vandal Dome DNIR		5.12” x 3.94”, bubble dia. 3.46”
Weight		0.8lbs.
Interior Dome	0.84 lbs (440g)
Vandal Dome	1 lb (500g)
Interior Dome DNIR		14.5 oz (410g)
Vandal Dome DNIR		1.75 lbs (800g)
Heater Kit (use ONLY with A-CV540DNIR)
Power Consumption		20W
Heater On		From -4°F – -40°F (-20°C – -40°C)
Heater Off		Switch Off at 0°F (-18°C)

Specifications are subject to change without notice.

A-A18C	60’ Camera cable
A-A30C	100’ Camera cable
A-A60C	200’ Camera cable
A-A90C	300’ Camera cable
A-MA800	Modular cable adapter
A-LA800	Line Amplifier for camera runs over 300’
HT202VE	20W Heater for 24VAC applications
FDCAP	Mount, back shell only
VDMWC	Mount, pendent, wall ceiling