The TowerCam is an innovative camera designed specifically for banking and retail opportunities when facial image and video capture of the customer is required.

The unique tower camera concept allows close-up imaging of the customer during a transaction. This concept is far superior to over-the-head camera shots that many times result in blocked camera views and diminished facial recognition due to the camera's distance from the transaction point. The camera's video image may be recorded to the system's digital video recorder for later playback and archive.

The TowerCam features a high-resolution 540TVL color camera with an integrated 3.6mm wide angle lens offering a 74° horizontal viewing angle for excellent image capture.

The camera offers full adjustment in pan angle, height, and camera tilt to customize the image view. The camera height may be adjusted from 16.9" to a full 23.9" to ensure the camera view is positioned above typical bank teller window design construction elements. The assembly offers a +/- 45° base pan angle adjustment and the camera may be independently tilted +/- 10° to ensure ideal image capture. Locking mechanisms are provided to ensure the camera's view is not inadvertently changed once installed in the defined position.

A standard BNC connector and a two pin screw terminal cable are provided inside the base for easy RG-59U video cable connection and for 12~15VDC operation. The base accommodates vertical cable exit, (1" minimum hole-diameter required) through the counter top or horizontally at the base using easy to remove cable exit tabs, eliminating the need for the large-hole drilling in designer solid surface counter-tops. A flat metal base with an adhesive bottom for direct attachment to a flat surface is provided.

The TowerCam is available in a black case color to match most installation aesthetics.

The TowerCam requires 12~15VDC power and includes a 12VDC power supply.

NOTE: When ordered for use with ADT RJ-11 systems, the model number A-RJ2BNCST, BNC/power connector adapter must be ordered separately.

NOTE: If required, the RJ-11 camera cable must be ordered separately and is available in 60’, 100’, 200’ and 300’ lengths.

• High-resolution 540TVL color camera
• Adjustable: 16.9" - 23.9" height, 90° pan, 20° tilt
• Flat metal base option with adhesive included
• Standard BNC / Power-screw terminal connections
• 12VDC power supply included (with mating connector)
• Available in a black case

Model
CTH36PB	540TVL color camera, 3.6mm, TowerCam case, black, 12~15VDC
Power
Power Source	12~15VDC
Power Consumption	Max 1.5 Watts
General
Image Sensor	1/3” Sony Super HAD CCD
Total Pixels	811 (H) x 508 (V)
Scanning System	2:1 interlace
Scanning Frequency	15.734KHz (H), 59.94Hz (V)
Sync. System	Internal
Electronic Shutter	1/60 ~ 1/100,000 sec.
Resolution	540 TV lines
Min. illumination	1.0 lux @ F1.2, 50 IRE
Video Output	1.0 Vp-p (75 ohm, composite)
S/N Ratio	More than 50dB (AGC off)
Function
Auto Exposure	ON
White Balance	ATW Fixed
Gain Control	Auto
Gamma	0.45
BLC	ON
Connector
Power input	Two pin screw terminal cable end
Video output	BNC connector
Lens mount	Fixed mount
Lens	3.6mm
Operating temperature	32°F ~ 104°F (0° ~ +40°)
Operating humidity	0 ~ 96% (non-condensing)
External dimension	19.4” – 26.4” (491.2 ~ 669.0mm)
Weight	2.43 lbs (1.1kg)
Shipping Weight	3.75 lbs (1.7kg)
Standards Compliance	FCC, cULus, RoHS
Specifications are subject to change without notice.

A-A18C	60’ Camera cable
A-A18C	60’ Camera cable
A-A30C	100’ Camera cable
A-A60C	200’ Camera cable
A-A90C	300’ Camera cable
A-MA800	Modular cable adapter
A-LA800	Line Amplifier, for camera runs over 300’
A-AB50C	50’ Cable, BNC to BNC
CONKIT4C	4-ch A/V/A Interface with cables
CONKIT9C	9-ch A/V/A Interface with cables
CONKIT16C	16-ch A/V/A Interface with cables
A-RJ2BNCST	BNC / Power connector adapter to RJ-11