Cables and Adapters
Cables and Adapters
Product Literature En Fr
Spec Sheet
Manual

Installation and Operation

The camera cables are 6-pin RJ-11 interconnection cables for use with the ADT observation monitors, ViewPro Mux, and ViewPro Plus DVRs, cameras and accessory units. Camera extension cables are available in lengths of 16’, 60’, 100’, 200’ and 300’. The A-LA800 line amplifier is recommended for cable runs longer than 300’. The line amplifier is shipped with a 15V dc power supply.


Several adapter cables are available to connect ADT observation systems to equipment using BNC input connectors, such as VCRs and DVRs. The A-A2VCBNC is a 6-ft VCR/DVR interconnection cable with RJ-11 for observation monitor connection and two RCA connectors for audio in and out and two BNC connectors for video in and out.

The CONKIT conversion kit will convert one RJ-11 camera to BNC and provide power for the camera for connection to residential televisions.

The CONKIT series is a 4-, 9-, and 16-channel interface used to convert the RJ-11 camera to BNC and RCA connectors for use with the digital recorders. The ACB-6 (6' RCA cable) is used to connect the CONKITxC audio output to the DVR. The A-AB50C, BNC cable is used as a general purpose 50' video extension cable for system or PVM video connections.

The A-RF2BM adapter will convert a RCA cable to a BNC connector. The cash register interface cable (A-A2POS) is used with third party accessories and retail cash registers for video monitoring of point of sale (POS) receipt transactions.








Cables
• Intended for use with all ADT Observation Systems, cameras and accessory units.
• Camera Cables feature modular 6 pin interconnections
• Coaxial Cable for High quality video signal preservation
• UL rated for above ceiling commercial installation

Line Amp
• Intended for use ADT Observation Systems when monitor to cable distances exceed 300 feet.
• Adjustable video gain and HF gain controls
• Includes 15V dc power supply and 16- foot cable connection

Lens
• 1/3” CS mount
• Vari-Focal
• Manual iris and dc-drive auto-iris
• Pre-wired for standard 4-pin auto-iris cable and connector

None

Ordering Guide:
SCN# Item
A-A5C Camera Cable, 16’ RJ11
A-A18C Camera Cable, 60’ RJ11 and adaptor
A-A30C Camera Cable, 100’ RJ11 and adaptor
A-A60C Camera Cable, 200’ RJ11 and adaptor
A-A90C Camera Cable, 300’ RJ11 and adaptor
A-LA800 Line Amp
A-AB50C Cable, 50’ BNC to BNC
BB-3 Cable, 3’ BNC to BNC
BB-6 Cable, 6’ BNC to BNC
ACB-6 Cable, 6’ RCA to RCA
A-A2VCBNC VCR Cable, 6’ RJ11 to RCA/BNC
A-MBR135 Cable, 6”, RJ11/RCA/BNC for system A/V input–non UL
A-A2POS Cable, 3’ Cash Register (POS) to camera interface
A-RF2BM Adaptor, RCA to BNC
A-RJ2BNCP RJ-11 to BNC/Power Pin
A-MA800 Modular cable adaptor, RJ11/RJ11
A-TV190PA Cable, 6’ RJ11 to BNC/RCA and power supply for A/V input–non-UL
CONKIT RJ-11 to BNC camera conversion kit including (1) A-MA800, (1) A-RF2BM, and (1) A-TV190PA
CONKIT4C 4-channel Audio/Video/Alarm/Power interface 
CONKIT9C 9-channel Audio/Video/Alarm/Power interface
CONKIT16C 16-channel Audio/Video/Alarm/Power interface
1512AC BNC / Power Pin to RJ-11 w/dropping resistor
A-LTV2Z3314CS Varifocal 3.3-8mm manual iris lens
A-LTV2Z3314GCS Varifocal 3.3-8mm DC auto iris lens
A-LTV12Z0516CS Varifocal 5-60mm manual iris lens
A-LTV12Z0516GCS Varifocal 5-60mm DC auto iris lens
CDVR-FLASH64 Compact flash card and reader for single channel DVR
A-XDLBW2 Lock box for all DVRs and VCR
KO600C Intercom, 2-way audio, RJ-11

Printer-Friendly Page